LEMFÖRDER Worldwide -

Your Partner Wherever You Are

You are here:

Global English

You are here:

Global English
worldmap

GLOBAL

GLOBAL

Identifying and remedying damage

to the chassis and steering system

Careless driving and dirt accumulation greatly increase the risk of wear on safety-relevant chassis and steering components. Workshops need to pay attention to typical damage patterns and remedy defects as required. If chassis or steering components are damaged, the person steering needs to expect handling of their vehicle to be critical. Experts at ZF Aftermarket therefore advise workshops to inform their customers of how important a regular inspection is. Many components can be affected.

Careless driving and dirt accumulation greatly increase the risk of wear on safety-relevant chassis and steering components. Workshops need to pay attention to typical damage patterns and remedy defects as required. If chassis or steering components are damaged, the person steering needs to expect handling of their vehicle to be critical. Experts at ZF Aftermarket therefore advise workshops to inform their customers of how important a regular inspection is. Many components can be affected.

Check rubber bellows, boots and clamping rings

Mechanics should particularly check whether the rubber bellows on the joints are worn, damaged or leaking. Because any splash water that gets in washes out the special greaseand this then allows dirt particles to enter the joint. These particles destroy the inner plastic spherical shell and damage both the ball stud and the joint housing. This means that the clearance in the joint no longer meets the standard. In the steering, the tie rod requires special attention: Apart from the rubber bellows, the steering boot needs to be checked for damage. The spring clamping rings should also be looked at so that any spots of rust are already identified as soon as they appear.

Check rubber bellows, boots and clamping rings

Mechanics should particularly check whether the rubber bellows on the joints are worn, damaged or leaking. Because any splash water that gets in washes out the special greaseand this then allows dirt particles to enter the joint. These particles destroy the inner plastic spherical shell and damage both the ball stud and the joint housing. This means that the clearance in the joint no longer meets the standard. In the steering, the tie rod requires special attention: Apart from the rubber bellows, the steering boot needs to be checked for damage. The spring clamping rings should also be looked at so that any spots of rust are already identified as soon as they appear.

Curb contact with consequences

On the chassis, the supporting joint, control arms and the stabilizer can show serious damage caused by corrosion, intruded foreign matter or dirt accumulation. In addition, driving over curbs is often the cause of defects. The consequences of damage greatly impair the vehicle handling and thus, safety. Apart from that, they often lead to increased wear on other chassis components as well as tires wearing unevenly and worse riding comfort. This means higher risk of accidents and additional repair expenses.

Curb contact with consequences

On the chassis, the supporting joint, control arms and the stabilizer can show serious damage caused by corrosion, intruded foreign matter or dirt accumulation. In addition, driving over curbs is often the cause of defects. The consequences of damage greatly impair the vehicle handling and thus, safety. Apart from that, they often lead to increased wear on other chassis components as well as tires wearing unevenly and worse riding comfort. This means higher risk of accidents and additional repair expenses.

Regular vehicle inspection

ZF Aftermarket recommends special tools for professional and smooth inspection or removal of supporting joints. This minimizes the risk of injury and reduces repair costs. ZF Aftermarket feels obliged to draw attention to the need for regular vehicle inspections: After all, the idea is to improve safety on the roads.

Regular vehicle inspection

ZF Aftermarket recommends special tools for professional and smooth inspection or removal of supporting joints. This minimizes the risk of injury and reduces repair costs. ZF Aftermarket feels obliged to draw attention to the need for regular vehicle inspections: After all, the idea is to improve safety on the roads.

Further information