LEMFÖRDER Worldwide -

Your Partner Wherever You Are

You are here:

Global English

You are here:

Global English
worldmap

Discover the whole portfolio of
ZF Aftermarket.


GLOBAL

GLOBAL

Instructions on how to
Replace Strut Mounts

The top fastening of the suspension strut is attached to the chassis via the strut mount – also known as the suspension strut mount. Since the strut mount must have both a damping force and a rotatable mounting for unhindered steering resetting, there are strict requirements for its function and wear resistance. Checking the strut mounts on a regular basis will ensure the vehicle is safe.

A worn or defective strut mount can be recognized by various symptoms. These include:
• Squeaking during spring movements of the chassis
• Poor cornering
• Crackling noises during steering wheel movements
• Restricted resetting of the steering after cornering
• Knocking sounds when driving over uneven surfaces

If the suspension strut mount has been checked and a defect has been detected, it should be replaced as described below. Like other chassis components, suspension strut mounts should always be replaced in pairs.

The top fastening of the suspension strut is attached to the chassis via the strut mount – also known as the suspension strut mount. Since the strut mount must have both a damping force and a rotatable mounting for unhindered steering resetting, there are strict requirements for its function and wear resistance. Checking the strut mounts on a regular basis will ensure the vehicle is safe.

A worn or defective strut mount can be recognized by various symptoms. These include:
• Squeaking during spring movements of the chassis
• Poor cornering
• Crackling noises during steering wheel movements
• Restricted resetting of the steering after cornering
• Knocking sounds when driving over uneven surfaces

If the suspension strut mount has been checked and a defect has been detected, it should be replaced as described below. Like other chassis components, suspension strut mounts should always be replaced in pairs.

Note: The images and the procedure described for replacing a strut mount in this useful tip are only intended as examples and may vary depending on the vehicle and suspension strut design.

Note: The images and the procedure described for replacing a strut mount in this useful tip are only intended as examples and may vary depending on the vehicle and suspension strut design.

Step by step: Replacing a strut mount

  • Step 1 – Remove the wheels.
    Raise the vehicle and remove the front wheels

    1. First, raise the vehicle using a two-pillar hoist and remove the wheels from the axle.

    Raise the vehicle and remove the front wheels

    1. First, raise the vehicle using a two-pillar hoist and remove the wheels from the axle.

  • Step 2 – Remove the suspension strut and clamp the fixture.
    Completely remove the suspension strut from the vehicle

    2. Remove the suspension strut according to the vehicle manufacturer's specifications and clamp it in an appropriate fixture.
    WARNING: Risk of serious injury caused by the sudden release of springs. Always use a suitable spring tensioner.

    Completely remove the suspension strut from the vehicle

    2. Remove the suspension strut according to the vehicle manufacturer's specifications and clamp it in an appropriate fixture.
    WARNING: Risk of serious injury caused by the sudden release of springs. Always use a suitable spring tensioner.

  • Step 3 – Compress the suspension spring using a spring tensioner.
    Compress the suspension spring using a spring tensioner

    3. Compress the suspension spring using a spring tensioner until it is released from the seat of the suspension strut mount.

    Compress the suspension spring using a spring tensioner

    3. Compress the suspension spring using a spring tensioner until it is released from the seat of the suspension strut mount.

  • Step 4 – Remove the nut on the damper connecting rod.
    Remove the lock nut on the strut bearing

    4. The nut on the damper connecting rod can now be removed. To do this, the connecting rod must be held securely using a suitable tool. Then the old strut mount can be removed.

    Remove the lock nut on the strut bearing

    4. The nut on the damper connecting rod can now be removed. To do this, the connecting rod must be held securely using a suitable tool. Then the old strut mount can be removed.

  • Step 5 – Position the new strut mount in its installation position.
    Position the new strut mount

    5. Position the new strut mount in its installation position. In doing so, check in particular that the lower part of the mount is seated correctly on the suspension spring.

    Position the new strut mount

    5. Position the new strut mount in its installation position. In doing so, check in particular that the lower part of the mount is seated correctly on the suspension spring.

  • Step 6 – Fit the bolts and fastening components.
    Fit the new lock nut on the connecting rod

    6. Fit all bolts and fastening components and tighten the lock nuts to the torque specified by the vehicle manufacturer.

    Fit the new lock nut on the connecting rod

    6. Fit all bolts and fastening components and tighten the lock nuts to the torque specified by the vehicle manufacturer.

  • Step 7 – Carefully release the spring tensioner.
    Make sure that the spring is in the correct position in the suspension strut plate and on the strut mount

    7. The spring tensioner can now be carefully released. In the process, continue to check that the suspension spring is placed on the strut mount and on the suspension strut plate correctly.

    Make sure that the spring is in the correct position in the suspension strut plate and on the strut mount

    7. The spring tensioner can now be carefully released. In the process, continue to check that the suspension spring is placed on the strut mount and on the suspension strut plate correctly.

  • Step 8 – Refit the suspension strut in the vehicle.
    Refit the suspension strut and fit new lock nuts to the strut mount

    8. Now the entire suspension strut can be removed from the holder and refitted in the vehicle.

    Refit the suspension strut and fit new lock nuts to the strut mount

    8. Now the entire suspension strut can be removed from the holder and refitted in the vehicle.

  • Step 9 – Refit the wheels.
    Perform an axle alignment

    9. Then refit the wheels and perform a full wheel alignment. Finally, carry out a test drive.

    Perform an axle alignment

    9. Then refit the wheels and perform a full wheel alignment. Finally, carry out a test drive.

Further Information