E-Mobillity Training by ZF Aftermarket

Equipped for the future

Become an Electrically Instructed Person with our new certified online training and ZF expertise.

Cross-vehicle

With our high-voltage trainings you will be taught for work on all HV vehicles - from cars and trucks to buses and special vehicles.

Our Services

New! High Voltage qualification for firefighters

ZF Aftermarket has developed a special high-voltage qualification for fire departments.

Learn more

New! Trainings for working with high voltage

From 2020, training courses for work on live high-voltage components will also be offered.

Learn more

Be prepared to serve the electric vehicle parc of the future with ZF

Become an Electrically Instructed Person with our new certified online training and ZF expertise!

When working on hybrid or electric vehicles, different, special high-voltage qualifications are recommended according to DGUV Information 200-006. This also includes all non-electrical work carried out on high-voltage vehicles, such as changing oil or wheels or replacing lamps (for which the level 1 qualification is required).
ZF Aftermarket has therefore developed an online training course in cooperation with the trade association. The training qualifies you as a person trained in electrical engineering (DGUV Information 200-006, level 1).

You will be sensitizsed and instructed in handling high-voltage systems in order to enable you to work safely on the vehicle. The aim of the training is to ensure that you can immediately and clearly identify the high-voltage components, understand the hazards they pose and are familiar with the component markings. The exact training contents can be viewed here.

Be prepared to serve the electric vehicle parc of the future with ZF

Become an Electrically Instructed Person with our new certified online training and ZF expertise!

The new online qualification for the Electrically Instructed Person consists of three steps:

E-learning module

The training contents can be viewed independently of time and location on your end device. You can monitor your learning success during the training by integrated exercises. The E-Learning also prepares you specifically for the following online test.

Online test

After completing the e-learning, you can check your gained knowledge in an online test. At the end of the test you will receive an overview of the achieved scores. The successful graduation is also the admission to a ZF Online Training with the expert ZF E-Mobility trainers.

ZF Online Training

The ZF Online Training will give you first-hand expert knowledge. You will have the opportunity to ask our ZF E-Mobility trainers questions, exchange experiences, join in in-depth technical discussions, and deepen your knowledge even further.

Have we aroused your interest? You can register here.

Instructions for registering on the ZF Aftermarket Portal and the e-learning can be found here.

Equipped for the mobility of the future

Only those who have up-to-date specialist knowledge will be successful in the long term in the competitive environment. ZF Aftermarket's high-voltage training courses will make you fit for the future. Independent workshops, authorized workshops, authorized ZF Aftermarket partners, fleet operators, vehicle or component manufacturers and rescue services - ZF Aftermarket offers you individual training for your business. In addition to in-depth know-how about high-voltage systems, you will also learn the necessary special tools and the optimum organization of the workshop in handling electric vehicles.

Equipped for the mobility of the future

The training courses were developed in accordance with the specifications of the Employer's Liability Insurance Association (DGUV Information 200-005) and in cooperation with the technical and development departments at ZF. The training courses qualify you for the safe handling of hybrid drive, electric drive, and fuel cell in practice.

Your benefits at a glance:

Blended learning approach: Combination of attendance and online offerings
Modular structure: Entry depending on previous electrical engineering knowledge
Flexible time management: Digital content can be called up flexibly
High practical relevance: Exercises performed directly on the high-voltage system or vehicle
Certification: Trainings according to the specifications of the German Employer's Liability Insurance Association (DGUV)
OE professional competence: Training development in coordination with ZF experts and internal departments

Show video now

Your benefits at a glance:

Blended learning approach: Combination of attendance and online offerings
Modular structure: Entry depending on previous electrical engineering knowledge
Flexible time management: Digital content can be called up flexibly
High practical relevance: Exercises performed directly on the high-voltage system or vehicle
Certification: Trainings according to the specifications of the German Employer's Liability Insurance Association (DGUV)
OE professional competence: Training development in coordination with ZF experts and internal departments

Show video now

New technologies require new expertise

Take advantage of our know-how from original equipment for hybrid vehicles and become a competent contact for e-mobility through the individually and interactively designed trainings. ZF Aftermarket offers trainings for research and development and non HV intrinsically safe vehicles as well as training courses for HV intrinsically safe vehicles.

Not HV-intrinsically safe means that complete protection against contact and arcing is not guaranteed. Accordingly, vehicles that have been involved in an accident are also considered non HV-intrinsically safe vehicles. The advantage for you as a training participant is that you are also qualified for work on HV-intrinsically safe vehicles and do not need any additional training.

The following trainings are offered for research and development and non HV-intrinsically safe vehicles:

1. Electrotechnical/expert instructed person
Target group: All persons who work with hybrid or electric vehicles
Contents: Training contents Electrically/expert instructed person.
Duration: approx. 2.5 hours.

Request high-voltage training
Target group: All persons who work with hybrid or electric vehicles
Contents: Training contents Electrically/expert instructed person.
Duration: approx. 2.5 hours.

Request high-voltage training
2. ZF high-voltage expert (corresponds to the expert person for work in research and development and on non-HV intrinsically safe production vehicles)
Target group: All persons who carry out work on hybrid or electric vehicles that goes beyond the normal scope of maintenance
Content: Training content ZF high-voltage expert.
Duration: Depends on individual previous knowledge.
Authorization for: Carrying out work on high-voltage components in a de-energized state, for example fixing and ensuring that the system is de-energized, troubleshooting the high-voltage system, shutting down and commissioning the high-voltage system or removing and installing high-voltage components.
There are various qualification paths for qualification as a ZF high-voltage expert that take your individual pre-qualification into account. The diagram provides you with an overview of the contents and scope of training.

Request high-voltage training
Target group: All persons who carry out work on hybrid or electric vehicles that goes beyond the normal scope of maintenance
Content: Training content ZF high-voltage expert.
Duration: Depends on individual previous knowledge.
Authorization for: Carrying out work on high-voltage components in a de-energized state, for example fixing and ensuring that the system is de-energized, troubleshooting the high-voltage system, shutting down and commissioning the high-voltage system or removing and installing high-voltage components.
There are various qualification paths for qualification as a ZF high-voltage expert that take your individual pre-qualification into account. The diagram provides you with an overview of the contents and scope of training.

Request high-voltage training
3. ZF high-voltage expert - level 3 (corresponds to the expert person for work on live high-voltage components)
Target group: All persons who carry out bodywork work or repairs on crashed hybrid or electric vehicles or who want to make a name for themselves as electrical experts.
Contents: Training contents Work on live high-voltage components.
Duration: Depends on individual previous knowledge.
Authorization for: Replacing battery cells, measurements in accordance with electrotechnical standards, laying and fastening cables, setting up and wiring circuits, connecting and operating peripheral devices, carrying out fault analyses and troubleshooting and repairing faults.
For the training course "Working on live high-voltage components" a successful qualification according to level 2 is required. The participant requires sound theoretical electrotechnical knowledge and practical electrotechnical skills.

Request high-voltage training
Target group: All persons who carry out bodywork work or repairs on crashed hybrid or electric vehicles or who want to make a name for themselves as electrical experts.
Contents: Training contents Work on live high-voltage components.
Duration: Depends on individual previous knowledge.
Authorization for: Replacing battery cells, measurements in accordance with electrotechnical standards, laying and fastening cables, setting up and wiring circuits, connecting and operating peripheral devices, carrying out fault analyses and troubleshooting and repairing faults.
For the training course "Working on live high-voltage components" a successful qualification according to level 2 is required. The participant requires sound theoretical electrotechnical knowledge and practical electrotechnical skills.

Request high-voltage training

Trainings for HV intrinsically safe vehicles

This training qualifies you to work on vehicles that are considered intrinsically safe due to their design and condition. HV-intrinsically safe means that complete protection against contact and arcing is guaranteed (e.g. series vehicles).

Target group: ZF [pro]Tech partner workshops

Duration: 2 days

Authorization for: Carrying out work on high-voltage components in a de-energized state, for example, shutting down and commissioning or removing and installing components.

Trainings for HV intrinsically safe vehicles

Target group: ZF [pro]Tech partner workshops

Duration: 2 days

Authorization for: Carrying out work on high-voltage components in a de-energized state, for example, shutting down and commissioning or removing and installing components.

High-Voltage qualification for fire brigades

ZF Aftermarket has developed a special high-voltage qualification for fire brigades to carefully prepare emergency services for emergencies with electric vehicles.

The training enables emergency services to correctly assess this special danger situation and derive the right steps for the safe recovery of electric vehicles and their occupants.

Extract from the training program for fire brigades:

Possible hazards during operations
Danger prevention
Approaches to rescue operations
Examples from real applications

ZF Aftermarket has developed a special high-voltage qualification for fire brigades to carefully prepare emergency services for emergencies with electric vehicles.

The training enables emergency services to correctly assess this special danger situation and derive the right steps for the safe recovery of electric vehicles and their occupants.

Extract from the training program for fire brigades: